Hej med jer,
Har brugt den sidste uge på at ringe rundt til div. Ophuggere i Jylland for at trampe manuelle forstole med SIPS og beklædt i sort læder op af jorden, det er desværre ikke lykkedes
Jeg har efter Balders indlæg på min købsannonce omkring at montere el førersæde i en bil, hvor der er kun er sædevarme og manuelt regulerede sæder, læst på forskellige Volvo fora om, hvordan det skal gøres.
Ifm. Min rundringning til ophuggeren fandt jeg to pæne sæder med elektrisk førersæde (ikke købt endnu) Har nogen et link til hvad og hvor et sådan skal forbindes ved brug af sædevarmestikkets ledninger?
Jeg fandt på det engelsk forum flg.
http://forums.t5d5.org/topic/6461-s70-e ... ng+diagram.
Hi peeps, just to add to chris's post...finaly fitted my 850R front seats today (been in container for about a year lol)...was very fortunate that a friend popped over to have a look and hope we can make this sooooo much easier cos it realy is....
1. Take seats out of car with battery disconnected.
2. You are going to use the heated seat plug on the seat loom to work the motors so you must cut the wires (in shroud) that go to the heated seat solenoid just under the front left of the seat (you only have the heated seat plug on the car if your needing to read this, and the heated seat plug on the seat is the only one that will fit the plug you have on your car)
3. Once cut, get the white/red wire, put on large female spade and connect it to the bottom left hand spade of the block that is to the bottom right of the seats (live)..
4. Get the yellow /red wire put on large female spade and connect it to the bottom right hand spade of the block that is to the bottom right of the seats (earth).
5. Connect plugs for heated seats, reconnect battery..ignition on...works fine....excellent...ignition off....bolt in seats....no more slipping around on just leather seats.........way fecking hay....( i will hope to get some pics up soon to help this post but if you are doing this feel free to pm it realy is simples....p.s my mate that helped is like a electronics genius..lol
Jeg kan ikke helt forstå, hvilket stik han klipper, samler igen og hvordan får ham sædevarme igen, har han ikke lige klippet ledningen??
Håber at en af jeg forklare det på forståligt dansk.
meget gerne med fotos hvis I har lavet en lignende operation en gang.
Waltersdorff